Your electricity bill is hiding
money you can get back.
Most factories, kitchens, and commercial buildings lose ₹50,000–₹3,00,000 every month to penalties, waste, and inefficiencies they don't know about. VoltSpark shows you where — and tracks every rupee you save when you fix it.
No hardware needed to start. Works with your existing utility bill.
Already set up by your energy consultant? Log in here →
What is typically hiding in your electricity bill
These are the most common avoidable losses in industrial and commercial facilities. Most go unnoticed because they are buried inside the bill — or never appear in it at all.
Power Factor penalty
BESCOM charges extra when PF drops below 0.90. Most facilities don't know their PF until the penalty arrives.
Max Demand overshoot
Drawing more kVA than your contracted limit even once in a month triggers a 50% surcharge on the excess.
Compressed air leaks
20–30% of air produced by a compressor is typically lost to leaks. That electricity is paid for and wasted.
Off-hours consumption
Machines, HVAC, and lighting left running after shifts add directly to the bill with zero production output.
DG running cost
Diesel generators cost 3–5× more per unit than grid power. Untracked DG hours are untracked money.
These are typical ranges observed in similar facilities — not guaranteed savings. What applies to your facility depends on your current setup, tariff structure, and what actions you take after VoltSpark identifies the issue.
How it works
No installation required. Start with your last utility bill.
Enter your utility bill
Start by entering your monthly electricity bill — units consumed, demand charges, PF penalty, and total amount. VoltSpark immediately shows you what is normal and what is not.
See what your bill is hiding
VoltSpark analyses your bill against BESCOM norms and flags anomalies — PF penalties, demand overshoot, unusual spikes, tariff errors. Every issue is shown in ₹, not technical jargon.
Fix it and track the savings
When you or your electrician fixes an issue, log the improvement. VoltSpark tracks the before and after — so you know exactly how much you saved, and your bill proves it.
Important: VoltSpark shows you where the problem is and how much it is costing you. Fixing it — whether that is an APFC panel, a VFD, sealing a compressor leak, or correcting a tariff error — requires your electrician, contractor, or equipment vendor. VoltSpark gives you the evidence to have that conversation and track the result.
Everything included in one platform
No credit card needed. Everything below is included on the free plan — manual entry, forever free.
Start today. No hardware needed.
Manual entry — start immediately
Enter your meter readings, utility bills, and energy data manually. VoltSpark works entirely from the data you type in. Most facilities start here and get meaningful insights within the first week.
No installation. No electrician. Just your bills.
IoT meters — upgrade when ready
When you want real-time data — live kW, PF, voltage per machine or feeder — smart meters can be installed by a local electrical contractor. You can also add process sensors alongside the meters: vibration sensors on machines, temperature probes on cold rooms, CO2 sensors in HVAC zones. Once connected, all data flows into VoltSpark automatically.
Hardware supplied and installed by third-party contractors. VoltSpark handles the data.
Simple, transparent pricing
Start free. Pay only for IoT smart meters you connect — no flat subscription, no per-user charges.
₹0/month
Forever free — no credit card needed
- Manual meter entry + utility bill analysis
- Energy cost dashboard (₹ view)
- ZED / ISO 50001 / Electrical Safety compliance
- Audit & CAPA management
- Savings tracker + ROI calculator (7 templates)
- Government scheme eligibility checker
- PDF reports & data export
- 2 years data retention · Unlimited users
IoT Smart Meters — when you want real-time data
Priced per smart meter per month, based on how many parameters the meter measures. No minimum. Add meters one at a time.
| Tier | What it measures | Per meter/month |
|---|---|---|
| Basic | kWh, kVA, PF, Hz (up to 4) + 1 sensor | ₹299 |
| Standard | + voltage & current per phase (5–10) + 2 sensors | ₹599 |
| Advanced | + max demand, TOU, load profile (11–15) + 3 sensors | ₹999 |
| Power Quality | + THD, harmonics, sag/swell, EN 50160 (15+) + 5 sensors | ₹1,499 |
| Sensor (additional) | Any type — choose based on your industry bundle | ₹149 |
Industry Intelligence Bundles (per site, on top of meters):
Each bundle applies domain-specific analytics to your meter data — interpreting readings through the lens of your industry's machines and operations. Requires Standard+ IoT meters. Multiple bundles can be active on the same site.
Manufacturing Intelligence
+₹2,500/month
Production energy intensity, compressed air efficiency, machine load profiles. Add vibration sensors for bearing/motor health and temperature sensors for coolant monitoring. CNC, metal, auto, plastics.
Commercial Kitchen Intelligence
+₹4,000/month
Demand management, load shedding alerts, ToD patterns. Add temperature sensors on cold rooms for HACCP/FSSAI compliance logging. Restaurants, hotels, canteens.
HVAC & Building Intelligence
+₹3,000/month
HVAC COP/EER tracking, zone consumption. Add temperature sensors for accurate COP/EER; CO2 + humidity sensors for IAQ monitoring. Offices, malls, buildings.
Healthcare Intelligence
+₹4,000/month
Critical load uptime, DG/UPS performance. Add temperature + humidity sensors for NABH-mandated OT/ICU monitoring; cold storage sensors for blood bank compliance. Hospitals, labs, pharma.
Custom Intelligence — from ₹5,000/month
Bespoke analytics for specific industries or processes. Talk to us.
Coming soon: Textile Manufacturing · Food Processing · Cold Chain & Logistics
Example monthly bills:
2 meters — 1 Standard incomer + 1 Basic DG sub-meter
₹898/month
5 meters — 1 Advanced incomer + 3 Standard feeders + 1 Basic DG
₹3,095/month
13 meters — 1 Advanced incomer + 8 Standard sub-feeders + 4 Basic utility meters
₹6,987/month
Smart meter hardware and installation by your local electrical contractor. VoltSpark handles data ingestion, analytics, and alerts.
Prefer to work with an energy consultant?
Many facilities use VoltSpark through an energy consultant or auditor who manages the platform on their behalf — setting up energy sources, analysing bills, raising audit findings, and tracking savings. If your consultant already uses VoltSpark, ask them to add your facility to their portfolio. You will have your own login and can view your dashboard anytime.
Find an energy consultant near youSee what your bill is hiding — in 10 minutes
Sign up, enter your last three bills, and VoltSpark will show you exactly where your money is going. No hardware. No installation. No commitment.
Core platform always free · IoT metering from ₹299/meter/month · No setup fees